Generating PDF Reports - Multiple criteria selection

This article can help users generate PDF reports based on the selection of multiple criteria (e.g. more than 1 WTG). 

Selection of multiple turbines

Go to the Inspections tab on the left. Next to All Damages click the dropdown arrow in the window box to “Select Site”. Choose the site you would like to include in your PDF report. 

Figure 1 - Selection of Ol Gusty site

In the next window box, choose the desired number of turbines to include in the PDF report.

Figure 2 - Selection of turbines 1 & 2

Generate the PDF report with chosen selections. Go to the right side of the screen and click on the drop-down labeled “Export Report” and choose PDF. 

Figure 3 - Snapshot of PDF printout that includes multiple turbines

Error message

If a PDF has not been pulled in a while, the server is "cold" and needs to spin up before it can run large batch searches quickly. SkySpecs is currently looking into improving this issue, as well as the fact that reports are limited to between 50-100 damages due to the time it takes to generate them.

If you do run into this issue, the best thing to do is grab one damage and try to download a PDF of 1 damage a couple of times. Once the report with 1 damage can download, the system is "warm" and can download bigger batches.

Figure 4 - PDF report error message